So You ve Bought Double Glazed Window Repair ... Now What

Double Glazed Window Repair

Double glazing is an energy efficient investment that reduces heat loss in the winter and keeps your home cooler in the summer. Repairing your double-glazed windows when necessary is a great way to ensure they are in good working order.

Over time condensation and misting could impact your double-glazed windows. This could cause your double glazed windows to be difficult to open or close.

Broken Panes

A stray baseball or a flying pebble from your lawnmowers or even a heavy storm could break the double panes of your windows and expose your home to the elements. While a cracked window can be difficult to fix, you don't have to have it replaced entirely. The insulated glass between two glass panes is in good condition, so you can repair your double-paned windows yourself.

You'll first need to remove any broken glass from the frame. You'll need to be cautious to keep glass shards from falling onto the floor or sliding out of the frame. Wear gloves for you hands, and an abrasive cloth around the damaged glass area to prevent further damage or cuts. After removing the broken glass, clean the frame of the window thoroughly to get rid of any sealant or debris. It is important to sand rough areas of the frame to ensure an even surface for your new glazing.

After cleaning the frame, you can apply another layer of glass to the area where you removed the broken pane. This is the best method to seal and protect your window, and will save you energy costs by preventing water and drafts from entering your home. Next, you will need to select your glazing material. Some options include clear tape which is more robust than regular tape and can keep your window from further cracking, and glazing film that is similar to clear plastic wrap. The benefit of this option is that it can be painted to match the frame you have, and it will keep out rain and snow as well.

Whatever material you use it's essential to press the glazier's points into that gap where the putty meets your frame. These will hold the glass in place, and will help it stick to the frame. You can find glazier's points in hardware stores, and are available in pre-made ropes which you roll out onto the frame rabbets.

Condensation

Double glazing is susceptible to condensation issues and if you experience this issue, it is best to call the company that installed the window repairs near me. A lot of windows come with warranties and guarantees to cover these issues. Condensation and fogging between panes of glass is a clear indication that the seals between your windows are broken and can only be repaired by a professional who will repair both panes.

It is a tricky process that requires special tools to remove and replace the old window. A professional can handle this job and provide the tools. It is best to leave the task to an expert. These tools can be hazardous.

Wear safety glasses and gloves if you choose to do it yourself. You may be exposed to flying glass fragments. It is important to take out all putty or metal glazing points from the grooves that will be receiving the new window. You will also want to wire-brush the frame and vacuum or wipe it with a damp cloth. After the frame is clean and dry you'll need to order a piece of replacement glass that is 1/8 inch smaller in each direction than the existing window and test-fit it in the grooves.

You will require a layer of silicone caulk into the grooves of your frames to ensure that your glass is properly installed. Once the caulk has dried and is dry, you must smooth it out and make any necessary adjustments. The wood molding will then be reinstalled.

If the weather abruptly changes, double-glazed windows can be difficult to open and close. Extreme temperatures can cause frames to expand or shrink and, as a result, they can sag or stick. If this is the problem you could try wiping the frames down with water and lubricating the joints. However, it may be best to ask the company who installed your windows to help.

Misunderstood

When moisture gets trapped in between the glass panes, it can cause misted double glazing. Double glazing is comprised of two panes which are separated by a gap filled with argon for greater thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside, allowing you to keep the temperature at a comfortable level in your home.

As time passes, the seal may break and moisture will begin to accumulate between the windows, causing them to become cloudy. This happens because the sun's rays heat the gap between window panes, which causes water to vapourize.

This is a natural process, but if it occurs between the windows' panes it could cause problems because it will no longer be able control the temperature in the room. Instead the temperature outside the upvc window repair will influence the temperature inside. If you notice your double glazed windows are becoming misty, call in the experts at Northfield Glass to investigate.

We can replace a single blow sealed unit, without needing to replace the entire window. This is far more streamlined than a total replacement. Our misty window repair involves taking off the glass, cleaning it, then replacing it with a new one to make a watertight seal again.

Certain companies in the business claim to inject chemicals through holes into windows that have been misty to eliminate the fog and condensation. We do not recommend using this method. This is not only unsightly but could also damage your toughened glass leaving you with a window that isn't functioning properly.

If you don't address the issue quickly it could result in mould, which could not only damage the window, Window Repair but pose health risks to your family members. The moisture in the window may cause other issues within your home, such as damp or rot. In some cases, it may be necessary to replace the entire window.

Blown or Failed

Modern double glazed windows have two glass panes that have an inert gas or air in between them. This increases their thermal efficiency, keeping the cold out and heat in. As time passes, the gas can become depressurised and cause a variety of issues.

One of the most frequently encountered is condensation that forms between the panes. Although it's a normal phenomenon, it doesn't mean your window is damaged, it can be an indication that you need to seal your windows. Condensation could also be an indication of broken double glazing, which could require a re-installation.

Double-glazed windows can also create draughts. This could be because of a failed seal or handle that is broken, or a damaged lock. It is important to fix this problem as soon as possible. A draught will cause you to spend more on heating. Test the seals on the window frame by feeling for cold air.

You will also notice water beads on the interior of windows if the window seals aren't performing as they should. This is an indication that you need to seal your double-glazed windows.

Your window frames are designed to move a bit in order to keep the glass sheets in position. However, over time, this particular packaging material will be compressed and cause the seal to break. This will allow air to flow between the panes, and decrease the energy efficiency of your window.

A blown seal is a clear indication that your double glazing is damaged and needs to be fixed immediately. A blown seal stops your double glazing performing its primary purpose, which is to keep cold air out and warm air in. In addition, a blown seal can let moisture in, which could cause mold and other unpleasant conditions. It is recommended to contact a double glazing repair specialist immediately if you notice a blown seal in your double glazed windows, since they could replace the entire unit.