10 Myths Your Boss Has Regarding Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge amount of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good working order.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. However when windows with double glazing repairs near me panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation you'll need to find some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

If you're planning to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass, so that any shards fall onto the cloth instead of onto the floor where they can be trampled upon and cause further damage.

Once the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional is able to come out and fix the window. It also acts as a barrier, deterring any intruders from getting access to your home. If the gap is large, you may be interested in a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

upvc window repairs near me windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they are susceptible to a range of issues, including sliding. A sagging uPVC window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. After that, using the screwdriver, window Repairs you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the size of the window, tighten the screws to secure them in place.

If you are unable to reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are watertight and secure from draughts.

uPVC handles could also become loose. This is often caused by screws that have been removed over time, but it can be due to the handle mechanism wears out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix and should be undertaken by any DIY expert. Depending on the severity of the issue the old caulking may need to be removed before a fresh layer can be applied. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leakage is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens in the breeze. They can be easily repaired by any skilled DIYer and can be completed in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that have hinges and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier with someone else to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. You can check this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide advice.

It is also essential to grease the hinges regularly. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges, also due to wear and tear may become displaced, which causes an opening to appear where the sash joins the frame. If they are beyond repair, it may be necessary to get them re-aligned. The interlock, which is located on the hinge of the window and can also become misaligned, again it's possible to just give them a clean but in some cases it might be necessary to get them replaced.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass. which will help regulate indoor temperatures and again will reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be put on the windowsill on top. They will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it may be more cost-effective to replace them than to repair them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.