10 Misconceptions Your Boss Shares Regarding Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that aid the new pane in being able to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the cloth rather than on the floor, where they could be trampled on and upvc Window repairs cause further damage.

It's a great idea tape the gap once the glass has been removed. This will prevent water and drafts from entering your property until a professional comes out to repair the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the distance between the door and the window is substantial, you may need to consider an alarm system that includes windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may develop a variety of issues such as sliding. A window that is sagging can cause problems with light, draughts and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window repairs near me to test the fit after you've repositioned your hinges. If you're satisfied with the fit of the window, you can tighten screws to keep them in place.

If you are unable to reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are watertight and draught-proof.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism wears out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corners of the sash must align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is essential to act if you get up each morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the caulking that was used up might need to be removed before a new layer is applied. It is important to remember that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled correctly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. This can be easily corrected by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open, or if it blows open with a breeze. They can be repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It's very simple to change a window hinge but it's much easier if someone helps you to hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you advice.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to operate and close more smoothly. It also helps prevent corrosion and reduce the risk of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. These can be easily repaired by giving them a good cleaning, but if they are beyond repair it may be necessary to get them realigned or replaced. The interlock may also become disaligned. This happens on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next most common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will provide excellent insulation and security for your home. It is crucial to recognise that all windows have a life span and they may reach a point where it is more efficient to replace them than fix them. If you have any problems with your Upvc window it is recommended to speak with an expert immediately.